This FIT version wine display cabinet will allow you to present up to 60 bottles in an original way, while maintaining them at the perfect temperature for serving or storing.

Versatile use of the wine cabinet : This showcase is versatile, thanks a its regulation that allows you to program the temperature set point for the bottom of the appliance, as well as the activation of the internal ventilation. Depending on the selected setting, it can be used :
- either for serving white wines, rosés and champagnes : between 4 and 10°C,
- or for serving red wines : between 14 and 16°C or between 14° and 20°C,
- or for both service and conservation of all types of wines : the temperature will then increase from 4 to 16°C over the whole height: 4-8°C for the service of Champagnes, 8-12°C for the service of white and rosé wines, 12-14°C for the conservation of wines and 14-16°C for the service of red wines.

In this version, the cabinet can hold up to 60 bottles, lying on aluminum tubes, widthwise, which leaves the labels of the bottles at the front and back visible. A total of 60 bottles are displayed with the label visible. The maximum diameter of the bottles is 90mm, which allows for most 75cl sizes (Bordeaux, Burgundy, Champagne). 
Important: the interior equipment included corresponds to the main product picture and cannot be modified after manufacture. However, other equipment versions exist to suit your needs (inclined bottles, vertical bottles or mixed equipment). Do not hesitate to consult the different models available (see In the same range).

This display cabinet is designed to be installed freestanding. However, it is also possible to install them in a niche. To do so, the space around the feet must remain completely free and an opening must be left above (minimum air passage 200cm² per unit).

Cladding : this model features a customizable FIT frame, allowing modules to be assembled and the design to be tailored to the ambiance of your space, with 18 finishes available. Its sleek design and elegant lines make it a true aesthetic asset.  
Crafted from HPL, it provides a highly precise finish, perfectly suited to contemporary interiors and premium spaces. More discreet than a traditional frame, the FIT frame blends seamlessly with the cellar, enhancing its contents while optimizing space.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Noise level: This display case has a complete programming dedicated to a domestic use in order to guarantee a very low noise level, and thus place the device in the room you want.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).