This wine display cabinet will allow you to present up to 24 bottles in an original way, while maintaining them at the perfect temperature for serving or storing.

This showcase is versatile, thanks a its regulation that allows you to program the temperature set point for the bottom of the appliance, as well as the activation of the internal ventilation. Depending on the selected setting, it can be used :
- either for serving white wines, rosés and champagnes : between 4 and 10°C,
- or for serving red wines : between 14 and 16°C or between 14° and 20°C,
- or for both service and conservation of all types of wines : the temperature will then increase from 4 to 16°C over the whole height: 4-8°C for the service of Champagnes, 8-12°C for the service of white and rosé wines, 12-14°C for the conservation of wines and 14-16°C for the service of red wines.

Maximum visibility: the glass panels on the front, sides and top give maximum visibility to your bottles. In addition, the sliding doors provide easy access to the bottles and reduce the space required to open them. These doors are equipped with a lock to secure access to the contents of the display cabinet.

Horizontal layout : this display case can accommodate up to 24 bottles, lying on aluminum tubes, widthwise, which allows the bottle label to be seen at the front. A total of 12 bottles are displayed with the label visible. The maximum diameter of the bottles is 93mm, which allows for most standard 75cl sizes (Bordeaux, Burgundy, Champagne).
In this version, the interior equipment cannot be modified after manufacturing. However, do not hesitate to consult the other equipment versions available for this model (see In the same range).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- the wooden frame of the front can be painted in the colour of your choice, and it can also be delivered raw, in order to apply your own finish (paint, laminate, vinyl, etc.).
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural daylight white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Installation : this cabinet is designed to be installed freestanding to take advantage of the 3 glazed sides. However, it is also possible to install it in a niche. To do so, the space around the feet must remain completely free and an opening must be left above (minimum air passage 200cm² per unit).

For optimal performance, this model should be installed in a room with a temperature between 16°C and 25°C and should never be exposed to sunlight. Above 25°C, the lowest temperature settings will be difficult to achieve and there is a risk of condensation on the glass walls (depending on the ambient humidity and the frequency of opening).