Thanks to this built-in wine display cabinet, with a capacity of 112 bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the ideal temperature for serving or storing.

Versatile use : this unit has a specific regulation with the possibility to set the bottom temperature and to activate or not the internal ventilation. Depending on the setting, it can be used :
- either for serving white wines, rosés and champagnes only
- or for serving red wines only
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Inclined presentation : This showcase can accommodate up to 112 bottles, inclined on aluminum tubes, of which 64 are inclined towards the front and 48 are inclined towards the back: 100% of the bottles are directly accessible and 100% of the labels are visible. In addition, the maximum diameter of the bottles is 120mm, which allows to welcome most of the 75cl and magnum sizes of all regions (Bordeaux, Burgundy, Champagne).
In this version, the interior equipment cannot be modified after manufacturing. However, do not hesitate to consult the other versions of equipment available for this model (see In the same range).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- The wood frame is available in many different finishes and can also be ordered raw, so you can apply your own finish (paint, laminate, vinyl, etc)
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Built-in installation: this display cabinet is intended to be placed on the floor in a niche crossing a wall, in order to enjoy its front and rear double glass doors. It can also be placed on a stand to raise it, as long as the stand can support the weight of the cabinet loaded with bottles. 
Important: the 4cm high space at the floor level must remain entirely free to allow the ventilation of the cooling unit.

Noise level: this cabinet is equipped as standard with a powerful cooling unit, designed for professional use. Its noise level (47dB) is perfectly adapted to most commercial uses, but it can be reduced if installed in a quiet room, by simply select the Acoustic Pack option.  If installed in a home, it is recommended to select the Domestic Pack which includes a complete programming of the device for a private use.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).