Thanks to this built-in wine display cabinet, with a capacity of 184 bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the ideal temperature for serving or storing.

This model is a combination of 2 independent display cabinet placed on above the other. The main cabinet, in the lower part, can hold 112 bottles and can be set for many uses. The top compartment (64 bottles) is only intended for storage or for red wine service (setting between 12 and 16°C)

Versatile use : this unit has a specific regulation with the possibility to set the bottom temperature and to activate or not the internal ventilation. Depending on the setting, it can be used :
- either for serving white wines, rosés and champagnes only
- or for serving red wines only
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Horizontal display: in this version, the main unit can hold up to 120 bottles, lying on aluminum tubes, widthwise, which leaves the label of the bottle placed in front visible. A total of 30 bottles are placed in the front, with the label visible, and 90 are in the back, not visible. The maximum diameter of the bottles is 90mm, which allows for most 75cl sizes (Bordeaux, Burgundy, Champagne).
The upper unit can hold up to 64 bottles lying on aluminium tubes (L320xW90mm max).
In this version, the interior equipment cannot be modified after manufacturing. However, do not hesitate to consult the other equipment versions available for this model (see In the same range).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- The solid wood curved frame is available in many different finishes and can also be ordered raw, so you can apply your own finish (paint, laminate, vinyl, etc)
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.
Important : this option doesn't apply to the upper compartment.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Built-in installation: this display cabinet is intended to be placed on the floor in a niche. The 4cm high clearance at the floor level must remain entirely free to allow the ventilation of the cooling unit.

Noise level: this cabinet is equipped as standard with a powerful cooling unit, designed for professional use. Its noise level (47dB) is perfectly adapted to most commercial uses, but it can be reduced if installed in a quiet room, by simply select the Acoustic Pack option.  If installed in a home, it is recommended to select the Domestic Pack which includes a complete programming of the device for a private use.
Important : this option doesn't apply to the upper compartment which has a noise level of 45dB.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening)