This FIT version combination of 4 modular wine cabinets, with a capacity of 448 bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the perfect temperature for serving or storing.

Versatile use : each of these 4 units has its own regulation, with the possibility to set the bottom temperature and to activate or not the internal ventilation.
Depending on the setting, each unit can be used :
- either for serving white wines, rosés and champagnes only
- or for serving red wines only
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Inclined layout : this showcase can hold up to 448 bottles, inclined on aluminium tubes, of which 256 are inclined towards the front, and 192 are inclined towards the back. 100% of the labels are visibles and 100% of the bottles are accessible. The maximum diameter of the bottles is 120mm, which allows for most 75cl and magnum sizes from all regions (Bordeaux, Burgundy, Champagne).
Important: the interior equipment included corresponds to the main product picture and cannot be modified after manufacture. However, other equipment versions exist to suit your needs (inclined bottles, vertical bottles or mixed equipment). Do not hesitate to consult the different models available (see In the same range).

Cladding : this model features a customizable FIT frame, allowing modules to be assembled and the design to be tailored to the ambiance of your space, with 18 finishes available. Its sleek design and elegant lines make it a true aesthetic asset.  
Crafted from HPL, it provides a highly precise finish, perfectly suited to contemporary interiors and premium spaces. More discreet than a traditional frame, the FIT frame blends seamlessly with the cellar, enhancing its contents while optimizing space.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Installation : this model is designed to be installed in a central position to take advantage of its 2 glazed sides. It can also be placed as a separation between 2 spaces.

Noise level: these cabinets are equipped as standard with a powerful cooling unit, designed for professional use. Its noise level (47dB) is perfectly adapted to most commercial uses, but it can be reduced if installed in a quiet room, by simply select the Acoustic Pack option.  If installed in a home, it is recommended to select the Domestic Pack which includes a complete programming of the device for a private use.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).