Thanks to this combination of 5 modular wine cabinets, with a capacity of 577 bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the perfect temperature for serving or storing.

Versatile use : each of these 5 units has its own regulation, with the possibility to set the bottom temperature and to activate or not the internal ventilation.
Depending on the setting, each unit can be used :
- either for serving white wines, rosés and champagnes: between 4 and 10°C,
- or for serving red wines: between 14 and 16°C or between 14° and 20°C
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Maximum visibility: the glass panels on the front, sides and top give maximum visibility of your bottles. In addition, these showcases are equipped with sliding doors, facilitating access to the bottles and reducing the space required for opening.

Bottle display: in this version, the cabinet can hold up to 577 bottles and expose 188 labels, divided in 4 units :
- 2x112 bottles, inclined on aluminium tubes, of which 128 are inclined towards the front, with the label visible, and 96 are inclined towards the back, which are not visible but accessible. The maximum diameter of the bottles is 120mm, which allows for most 75cl and magnum sizes from all regions (Bordeaux, Burgundy, Champagne).
- 2x120 bottles, lying on aluminum tubes, widthwise, which leaves the label of the 60 bottles placed in front visible. The maximum diameter of the bottles is 90mm, which allows for most 75cl sizes (Bordeaux, Burgundy, Champagne). In this version, the interior equipment cannot be modified after manufacturing. However, do not hesitate to consult the other equipment versions available for this model (see In the same range).
- 1x113 bottles, mixed equipment : this showcase includes a various equipment offering different positions for the bottles. This equipment is customisable as the different racks can be moved, interchanged or removed. It is also possible to order additional accessories to be able to modify the set-up of the appliance later (see Recommended Accessories).
Do not hesitate to consult the other versions of equipment available for this model (see In the same range).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- The exterior cladding is magnetic, customizable and interchangeable, allowing it to be adapted to the atmosphere of your room and easily replaced if needed. Many standard colors are available and it can also be ordered raw, so you can apply your own finish (paint, laminate, vinyl, etc)
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the units can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the appliance, also improving the readability of labels. The standard lighting is natural white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Installation : this model is designed to be installed free standing against a wall to take advantage of the 3 glass sides. Thanks to the position of the cooling unit in the floor of the unit, no free space is required at the back, above or on the sides, making it possible to install it in a niche. It can also be placed on a base to be elevated, provided that the base can support the weight of the loaded display case (approx. 1150-1200kgs).
Important : the space in front of the feet must remain completely free to allow ventilation of the cooling unit.

Each unit is equipped as standard with a powerful cooling unit, designed for professional use. Its noise level (47dB) is perfectly adapted to most commercial uses, but it can be reduced if installed in a quiet room. To do this, simply select the Acoustic Pack option. For residential installations, it is recommended to select the Domestic Pack which also includes full programming of the unit for home use.

For optimal performance, this model should be installed in a room with a temperature between 16°C and 25°C and should never be exposed to sunlight. Above 25°C, the lowest temperature settings will be difficult to achieve and there is a risk of condensation on the glass walls (depending on the ambient humidity and the frequency of opening).