Thanks to this FIT version combination of 1 modular wine cabinet (with a capacity of 112 bottles), and 1 non-refrigerated module will enable you to present your wines, glassware or spirits in an original way as a perfect showcase, while keeping your wines at the perfect temperature for serving or storing.

The non-refrigerated display case for glassware or spirits will allow you to showcase your finest glassware to accompany your wine service or to display your best spirits.

Versatile use of the wine cabinet : This showcase is versatile, thanks a its regulation that allows you to program the temperature set point for the bottom of the appliance, as well as the activation of the internal ventilation. Depending on the selected setting, it can be used :
- either for serving white wines, rosés and champagnes : between 4 and 10°C,
- or for serving red wines : between 14 and 16°C or between 14° and 20°C,
- or for both service and conservation of all types of wines : the temperature will then increase from 4 to 16°C over the whole height: 4-8°C for the service of Champagnes, 8-12°C for the service of white and rosé wines, 12-14°C for the conservation of wines and 14-16°C for the service of red wines.

Inclined layout : this showcase can hold up to 112 bottles, inclined on aluminium tubes, of which 64 are inclined towards the front, with the label visible, and 48 are inclined towards the back, which are not visible but accessible. The maximum diameter of the bottles is 120mm, which allows for most 75cl and magnum sizes from all regions (Bordeaux, Burgundy, Champagne).
Important: the interior equipment included corresponds to the main product picture and cannot be modified after manufacture. However, other equipment versions exist to suit your needs (inclined bottles, vertical bottles or mixed equipment). Do not hesitate to consult the different models available (see In the same range).

This model is designed to be installed in a central position to take advantage of its 2 glazed sides. It can also be placed as a separation between 2 spaces.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Noise level: This display case has a complete programming dedicated to a domestic use in order to guarantee a very low noise level, and thus place the device in the room you want.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).