With this modular built-in wine cabinet, with a capacity of 24bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the perfect temperature for serving or storing.

Versatile use : this unit has its own regulation, with the possibility to set the bottom temperature and to activate or not the internal ventilation.
Depending on the setting, each unit can be used :
- either for serving white wines, rosés and champagnes only
- or for serving red wines only
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Horizontal display: in this version, the cabinet can hold up to 24 bottles, lying on aluminum tubes, widthwise, which leaves the label of the bottle placed in front visible. A total of 12 bottles are placed in the front, with the label visible, and 12 are in the back, not visible. The maximum diameter of the bottles is 93mm, which allows for most 75cl sizes (Bordeaux, Burgundy, Champagne).
Important: the interior equipment included corresponds to the main product picture and cannot be modified after manufacture. However, other equipment versions exist to suit your needs (inclined bottles, vertical bottles or mixed equipment). Do not hesitate to consult the different models available (see In the same range).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- The wood frame is available in many different finishes and can also be ordered raw, so you can apply your own finish (paint, laminate, vinyl, etc)
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is warm white (3000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Built-in installation: this model is intended to be placed on the floor in a niche. It can also be placed on a stand to raise it, as long as the stand can support the weight of the cabinets loaded with bottles. 
Important: the 4cm high clearance before the front feet must remain entirely free and an air passage of minimum 200cm² per unit must be provided  at the top of the niche to allow the ventilation of the cooling unit.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).