Thanks to this built-in wine display cabinet, with a capacity of 60 bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the ideal temperature for serving or storing.

Versatile use : this unit has a specific regulation with the possibility to set the bottom temperature and to activate or not the internal ventilation. Depending on the setting, it can be used :
- either for serving white wines, rosés and champagnes: between 4 and 10°C,
- or for serving red wines: between 14 and 16°C or between 14° and 20°C
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Sliding doors: in addition to providing perfect exposure, sliding glass doors allow easy access to bottles and create no clutter when opened. They are lockable thanks to a lock located at the top of the front.

Horizontal display: in this version, the cabinet can hold up to 60 bottles, lying on aluminum tubes, widthwise, which leaves the label of the bottle placed in front visible. A total of 30 bottles are placed in the front, with the label visible, and 30 are in the back, not visible. The maximum diameter of the bottles is 93mm, which allows for most 75cl sizes (Bordeaux, Burgundy, Champagne).
Alternative : in this version, the interior equipment included corresponds to the main product picture and cannot be modified after manufacturing. However, this model is available in a customizable version that can accommodate inclined, horizontal or vertical bottles (see In the same range).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- the wooden frame of the front is available in a "classic" finish or in a "Dune" finish, for an original design in relief. In addition to the many colors offered, this frame can also be ordered raw, in order to apply your own finish (paint, laminate, vinyl, etc.).
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is warm white (3000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Built-in installation: this display cabinet is intended to be placed on the floor in a niche. It can also be placed on a stand to raise it, as long as the stand can support the weight of the cabinet loaded with bottles. 
Important: the 4cm high clearance before the front feet must remain entirely free and an air passage of 200cm² minimum must be provided at the top of the niche to allow the ventilation of the cooling unit.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 25°C. Above 25°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening)