Thanks to this refrigerated display cabinet, with an effective volume of 339L, you’ll be able to present snacks, desserts or drinks in an original way as a perfect showcase, while keeping them at the perfect tasting temperature.
This display cabinet is equipped with a stirred cold production and a stepped temperature regulation, with a differential of about 4°C between the bottom and the top of the display case, which will allow you to organize your products according to their tasting temperature. 
Important: these appliance is not a refrigerator, it is only intended for presentation and are not designed to store sensitive foodstuffs (meat, fish, etc).

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- The wood frame is available in many different finishes and can also be ordered raw, so you can apply your own finish (paint, laminate, vinyl, etc)
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters, control of LED lighting. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is warm white (3000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control, or by mobile application (if the option Remote control by mobile application has been chosen).

Built-in installation: this model is intended to be placed on the floor in a niche. It can also be placed on a stand to raise it, as long as the stand can support the weight of the cabinets loaded with bottles. 
Important: the 4cm high clearance before the front feet must remain entirely free and an air passage of minimum 200cm² per unit must be provided  at the top of the niche to allow the ventilation of the cooling unit.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).